[How to Flash Stock Rom On Karbonn A35 Via USB in 5 minutes] Hello guys I am back with a new and cool stuff. Today i am going to show you, how you can easily flash stock (Official) rom on your Karbonn A35 using usb data cable. And without any problem. If you have a carbon A35 smartphone and you want to flash the stock ROM, then you are on right place. Follow the below instruction and flash it.
Disclaimer :This guide is for educational purpose only, I am not responsible if your device bricked after following this tutorial.
Important:
- Make sure your phone battery is must charged at list 40% to 50%.
- Make sure all the drivers are installed correctly on your computer.
Files are required:
- Karbonn Flash tool click here to download.
- Karbonn A35 Stock rom (Flash tool is include in this zip file) Click here to download.
- Drivers.zip Click here to download.
Procedure to flash-Start.
Step 1: Download and extract the Drivers.zip file using winrar, after extracting open the Drivers folder and double click on DPInst.exe and install it on your computer.
Step 2: Now extract the flash tool.zip file using winrar, after extracting open the Flashtool and double click on UpgradeDownload.exe and launch it on your computer.
Step 3: Now click on Load packet button (watch below image)
Step 4: Now select the downloaded stock rom (20130927_S880_02_QY_A35_V1.05.pac file) (watch below image)
Step 5: Now power-off your Karbonn A35 and, remove the phone battery.
Step 6: Now press volume Up + volume Down Button and insert your phone battery in your phone and connect your phone into computer via usb at the same time.
Step 7: Now press on the Start button to start the flashing process. (Watch below image)
Step 8: Wait until it is done. Normally it will take 4 to 5 minutes.
Step 9: After done you will see pass message (Watch below image)
Step 10: Remove usb cable and power on your phone. Done..)
ConversionConversion EmoticonEmoticon