How to flash stock firmware on Samsung star 3 GT-S5222 via USB

[Flash Official Firmware on your Samsung Star 3 Duos GT-S5222 Using USB]. Samsung star 3 duos GT-S5222 is a best gsm mobile phone available in the market.I think this phone is really best for a Business man or a busy people because he likes to handle 2 lines on one device.But it is not the end of the mobile facility,it's come with 3.15 Mega pixel camera for great picture quality,micro-SD slot for external storage, WiFi, Bluetooth.If you have you own Samsung star 3 duos phone and you want to flash the flash file on it then you are on right place.In this post i am going to show you how you can easily flash official flash file on your Samsung star 3 GT-S522 from usb without any problem..follow the instruction below and flash the official file on your phone now..

Disclaimer :This guide is for educational purpose only, I am responsible if your device bricked after following this tutorial.

Important:

1.  Install Samsung kies driver (Recommended)
2. Make a full backup your phone from Kies (Contacts,SMS etc)
3. Remove your SD-card

Files are required:

1. Flash tool Click here to download this flash tool.
2. Flash file of Samsung star 3(Flash tool is included) Click here to download this file
3. A original Samsung mobile usb cable.

Procedure to flash your Star 3

Step 1: Power off your mobile ,remove battery after 3 to 4 second re-enter battery.

Step 2: Now it's time to run the flash tool, double click on flashtool.exe and run it.

Step 3: Now click on 3(...) button (Watch below image)

Step 4: Now select the flash files one by one 

[Note The selecting of firmware files must be in the below order](Watch below image) 

1-S5222xxx_psi.fls 2-S5222xxx_slb.fls 3-S5222xxx_BSY.fls 4-S5222xxx_CDS.fls 5-S5222xxxx.dffs.

Step 5: Don't untick the custom order box.

Step 6: IN Erases Calibration! : Select (Erase whole flash before download).

Step 7: Don't change the baud rate -921600

Step 8: Now in Communication Driver drop down menu select: Infineon USB Driver (Watch below image to Step 5,6,7or8).

Step 9: Now click on next button when you click on next button A new window will appear.

Step 10: Click on start Usb 1 button(Watch below image)

Step 11: After click on start usb 1 button connect your phone to pc using Usb cable.

Step 12: Now the flashing process will start automatically,it will take 4 to 5 minutes to complete.

Step 13: When the flashing process is done,you will see a success message.

Step 14: Now disconnect your phone and remove the usb cable.

Step 15: Power on your mobile and make a hard reset by the code *2767*3855# ..It's Done.. 

• Tweet
• Share
• Share
• Share
• Share

About PRINCE

Author : Prince Chaudhri is a young addicted blogger, He loves to sharing files And tips only for enjoy, He is Like to play with HTML/java script coding and He is also like meet new peoples.

Related Post